KDF
En | Gr | Ar | Fr | Es | Ru | Uk
POLTRACK SPRAYCOAT SEALED, SBR 0.5-2.5
POLTRACK SPRAYCOAT SEALED, SBR 0.5-2.5
RECOMMENDED SUBSTRUCTURE
Applied on dry asphalt surfaces (30 days old at least) or smooth concrete surfaces (30 days at least old) without arising humidity issues and free of materials that might prevent bonding e.g. dust, loose particles etc (in case of asphalt or concrete). The success in the application depends on the right preparation of the underlay and use of the material.
  • Material
    Consumption kg/sq.m.
  • POLAPLAST P10
    0.15-0.2 kg/m2
  • BASE LAYER: POLAPLAST P13 & RECYCLED RUBBER 858
    1.32 kg/m2 & 6 kg/m2
  • SEALING LAYER: POLYSPORT STUCCO 1050
    1.5 kg/m2
  • SPRAY LAYER: POLAPLAST P12 & EPDM 856
    1.35 kg/m2 & 0.9 kg/m2
Technical Description

Synthetic outdoor system for running tracks. It is applied on fine asphalt or smooth, waterproof concrete, without rising humidity issues. Consists of a first base layer  mixed at site, mixture of RECYCLED RUBBER 858 SBR granules and the polyurethane binder POLAPLAST P13, then a second layer (sealing layer), a polyurethane pore filler, POLYSPORT STUCCO 1050 and then a third layer, spray coat, is applied at site which consists of EPDM 856 (0.5-1.5mm) and the spraycoat, colored polyurethane binder POLAPLAST P12. Priming with POLAPLAST  P10 precedes the application.

 

Steps:

 

1. POLAPLAST P10 - Polyurethane primer. Applied by airless sprayer or brush.

2. Mixture of POLAPLAST P13 and RECYCLED RUBBER 858 SBR granules. Applied by paving machine.

3. POLYSPORT STUCCO 1050 - Polyurethane, elastic, two-component pore filler. Used for sealing porous prefabricated subfloor of sports floorings such as ISOPOL 854 or wet-pour cushion shock-pads. Applied by flat trowel.

4. Mixture of POLAPLAST P12 and EPDM 856. Applied by spraying machine in two crossings.