SYSTEM SAFEPOL UV
Vector Share
Applied only on dry asphalt and concrete surfaces (over 30 days old from date of placement) without rising humidity issues and free of materials that might prevent bonding e.g. dust, loose particles, grease etc. The success in the application depends on the right preparation of the underlay and use of the material.
Material
Consumption kg/sq.m.
PU PRIMER 870
0. 2 kg/m2 - 0.3 kg/m2
Mixture of RECYCLED RUBBER 858 plus PU BINDER 1118
7.2 kg/m2/10mm
POLYSPORT 1052
0.4 kg/m2 - 0.5 kg/m2
Technical Description

Very elastic shock absorbent, cushion, wet-pour rubber flooring used as subfloor before exterior acrylic coatings and polyurethane coatings and as a competitive sports courts system in combination with UV-resistant PU top coating POLYSPORT 1052.
Consists of  a mixture of RECYCLED RUBBER 858 (84% by weight) with PU BINDER 1118 (16% by weight) applied by paving machine or by trowel with the parallel use of a cylinder (10kg). It can create many designs and patterns since it is over-coated by the special UV-resistant PU paint POLYSPORT 1052 in various colors.Applied in total thickness of 8mm to 20mm, depending on the elasticity needed.


Steps :


1.    PU PRIMER 870 – Special, polyurethane primer. Applied by airless spray or by brush on asphalt surfaces or on waterproof concrete surfaces without rising humidity issues.


2.    Mixture of RECYCLED RUBBER 858 plus PU BINDER 1118. Applied by paver machine or by flat metal trowel after spreading and leveling with rake and straightedge. Rolling with cylinder follows for compacting. Applied in thickness of 8mm up to 20mm.


3.    POLYSPORT 1052 – UV-resistant, polyurethane, aliphatic, mat or glossy, two-component top coating for outdoor sports floorings. Sprayed in two cross layers by airless spray on the surface in the desired color as colored UV protection of the surface, to create different designs and patterns and last for many years.

Select your court
Court Image
Select your color
Surface color #1
Surface color #2