Browse KDF certifications by organisation and application category to verify compliance, quality standards, and product-system approvals.
Total Certificates
76
Organisations
21
Certification Types
11
Shown After Filters
76
Showing 76 certifications
Tensile Strength & Dimensional Stability Tests – EN 12230:2023 & EN 13746:2004 | POLTRACK SANDWICH & POLTRACK FULL PU
SPORTS LAB
Running Tracks
The POLTRACK SANDWICH and POLTRACK FULL PU running track systems are referenced in a laboratory report covering tensile strength and dimensional stability testing according to EN 12230:2023 and EN 13746:2004. The tests evaluate the resistance of the tested material to tensile forces and its dimensional changes following exposure to water, freezing and heat, providing valuable information about its mechanical properties and performance under controlled laboratory conditions.
Friction & Abrasion Resistance Tests – ISO/IEC 17025 | NATURA SPECIAL & NATURA ROLL
TFi
Specialized Systems
The KDF NATURA SPECIAL and NATURA ROLL flooring systems were evaluated for friction and abrasion resistance to assess their surface friction characteristics and resistance to wear. These tests provide valuable information about the durability and surface performance of the flooring materials.
EN 13501-1:2018 Fire Classification for NATURA SPECIAL & NATURA ROLL
TFi
Specialized Systems
The KDF NATURA systems have been tested and classified according to EN 13501-1:2018, the European standard used to determine the reaction to fire performance of construction materials and flooring systems.
VOC Emissions & Indoor Air Comfort Test Report | KDF NATURA SPECIAL
Eco Friendly
Eurofins
Specialized Systems
The KDF NATURA SPECIAL flooring system was tested by Eurofins to evaluate Volatile Organic Compound (VOC) emissions and their impact on indoor air quality. The tested material achieved an A+ classification under the French VOC Regulation and passed the Indoor Air Comfort assessment, demonstrating low chemical emissions under the laboratory testing conditions. The results also confirm compliance with the evaluated AgBB, Belgian VOC and BREEAM International requirements.
Antibacterial Activity Test – ISO 22196:2011 | KDF NATURA SPECIAL
IMSL
Specialized Systems
The KDF NATURA SPECIAL flooring system was tested according to ISO 22196:2011 to evaluate its antibacterial activity against Escherichia coli and Staphylococcus aureus. This test assesses the ability of treated surfaces to reduce bacterial populations under controlled laboratory conditions, providing valuable information about the material's antibacterial performance for indoor flooring applications.
Impact Sound Insulation & Thermal Resistance Test – ISO 10140 & EN 12664 | KDF NATURA SPECIAL
TFi
The KDF NATURA SPECIAL flooring system was tested according to ISO 10140 and EN 12664 to evaluate its impact sound insulation and thermal resistance properties. These tests assess the flooring's ability to reduce impact noise transmission and resist heat flow, providing valuable information about its acoustic and thermal performance in indoor environments.
Antibacterial Activity Test – ISO 22196:2011 | AQUASOFT-EX
IMSL
The AQUASOFT-EX splash park flooring system was tested according to ISO 22196:2011 to evaluate its antibacterial activity against common bacteria, including Escherichia coli and Staphylococcus aureus. This test assesses the material's ability to reduce bacterial populations on its surface under controlled laboratory conditions, providing valuable information about its antibacterial performance in water play and recreational environments.
Chemical Resistance Test – ASTM F925-13 | AQUASOFT-EX
intertek
The AQUASOFT-EX splash park flooring system was tested according to ASTM F925-13 to evaluate its resistance to chemical exposure. This test assesses the effects of chemical substances on the flooring surface, providing valuable information about the material's chemical resistance and suitability for applications in splash parks, water play areas and other wet recreational environments.
Water Permeability Test – EN 12616:2013 | AQUASOFT-EX
SPORTS LAB
The AQUASOFT-EX splash park flooring system was tested according to EN 12616:2013 to evaluate its water permeability characteristics. The test assesses how water passes through the surface, providing valuable information about the material's behavior under wet conditions and its suitability for splash parks, water play areas and aquatic recreational facilities.
UV Resistance & Artificial Weathering Test – EN 14836:2018 | AQUASOFT-EX
SPORTS LAB
The AQUASOFT-EX splash park flooring system was subjected to accelerated ultraviolet (UVA) exposure testing according to EN 14836:2018 to evaluate its resistance to sunlight and artificial weathering. This assessment provides valuable information about the material's durability and performance under simulated outdoor exposure conditions, particularly for splash parks and aquatic recreational areas.
Shore A & Shore D Hardness Test – ASTM D2240 | EPDM 856 Granules
Wimpey Laboratories
EPDM Granules
The EPDM granules were tested according to ASTM D2240 to determine their Shore A and Shore D hardness, which measure the material's resistance to indentation. The tested samples recorded hardness values of 67 Shore A and 19 Shore D, providing measurable data on the material's hardness characteristics for technical evaluation in sports flooring and rubber surfacing applications.
Slip Resistance Test – EN 13036-4:2011 | EPDM 856 Granules
SPORTS LAB
EPDM Granules
The EPDM 856 rubber material was tested according to EN 13036-4:2011 using the Pendulum Test Method to assess its slip resistance. This test measures the frictional properties of the tested surface, providing valuable information for evaluating traction and slip safety in sports and recreational flooring applications.
UV Resistance & Artificial Weathering Test – FIFA Test Method 10 | EPDM 856 Granules
SPORTS LAB
EPDM Granules
The EPDM 856 granules were subjected to artificial UV weathering conditions according to FIFA Test Method 10 to evaluate their resistance to prolonged exposure to ultraviolet radiation and environmental weathering. This testing provides valuable information about the material's durability and suitability for outdoor sports surfaces exposed to sunlight.
EU REACH Compliance – PAHs & Lead Content Test | AQUASOFT-EX / AQUASOFT-EX WET POUR
Eco Friendly
SGS
The AQUASOFT-EX / AQUASOFT-EX WET POUR polymeric anti-slip flooring system, designed for splash parks and wet areas, was tested by SGS for Polycyclic Aromatic Hydrocarbons (PAHs) and lead content in accordance with EU REACH requirements. The tested sample successfully passed both assessments, with PAHs not detected above the laboratory's detection limits and lead content measured below the applicable regulatory limit, supporting the chemical safety of the tested flooring material.
Hygienic Certificate (PZH) – National Institute of Public Health, Poland | EPDM 856 Granules
Eco Friendly
National Institute of Public Health NIH – National Research Institute (NIZP PZH-PIB), Poland
EPDM Granules
The EPDM 856 granules have received a Hygienic Certificate from the National Institute of Public Health – National Research Institute (NIZP PZH-PIB), Poland. The certificate confirms that the product meets the institute's hygienic requirements for its intended applications, including playground safety flooring, outdoor sports surfaces, running tracks, artificial turf infill and rubber tiles, when installed and used according to the manufacturer's recommendations.
Environmental Product Declaration (EPD) – EN 15804+A2 & ISO 14025 | EPDM Granules HUB-5802
Eco Friendly
EPD Hub
EPDM Granules
The EPDM granules HUB-5802 are covered by a third-party verified Environmental Product Declaration (EPD) in accordance with EN 15804+A2 and ISO 14025. The declaration provides transparent, independently verified environmental impact data throughout the product life cycle, including production, transportation, installation, end-of-life stages, and potential benefits from recycling and energy recovery.
EU REACH Regulation – PAH Analysis | EPDM 856 Granules
Eco Friendly
intertek
EPDM Granules
The EPDM 856 granules were tested for the presence of Polycyclic Aromatic Hydrocarbons (PAHs), potentially hazardous chemical compounds that may be found in rubber materials. The analysis evaluates PAH content in accordance with the chemical safety requirements established under the EU REACH Regulation.
EU REACH Regulation – Phthalates Compliance Test | EPDM 856 Granules
Eco Friendly
SPORTS LAB
EPDM Granules
The EPDM 856 granules were tested in accordance with the EU REACH Regulation (Annex XVII, Entries 51 & 52) to determine the presence of restricted phthalates, potentially hazardous chemical compounds used in certain plastic materials. This testing evaluates the material against European chemical safety requirements.
Solar Reflectance Index (SRI) Test – ASTM E1980 | EPDM 856 Granules
Eco Friendly
INSTITUTO GIORDANO
EPDM Granules
The EPDM 856 granules were tested according to ASTM E1980 to determine their Solar Reflectance Index (SRI), evaluating the material's ability to reflect solar radiation and release absorbed heat. This assessment provides valuable information about the thermal performance of EPDM surfaces exposed to sunlight.
Heavy Metal & Environmental Compatibility Test DIN 18035-7 | EPDM 856 Granules
Eco Friendly
LABOSPORT
EPDM Granules
The EPDM 856 granules have been tested according to DIN 18035-7, verifying their environmental compatibility and heavy metal content for use in sports surfaces.
ISO 16000-9 VOC Emission Test Report for POLTRACK SPRAYCOAT
ISTITUTO GIORDANO
Running Tracks
The POLTRACK SPRAYCOAT running track system has been tested for volatile organic compound (VOC) emissions using the emission chamber method according to UNI EN ISO 16000-9.
ISO 16000-9 VOC Emission Test Report POLTRACK FULL PU EPDM
ISTITUTO GIORDANO
Running Tracks
The POLTRACK FULL-PU EPDM running track system has been tested for volatile organic compound (VOC) emissions using the emission chamber method according to ISO 16000-9.
ISO 16000-9 VOC Emission Test Report for ECOFLEX FLOOR
ISTITUTO GIORDANO
Outdoor Sports Flooring
The ECOFLEX FLOOR system has been tested according to ISO 16000, an international standard that measures volatile organic compound (VOC) emissions from construction materials.
ISO 16000-9 VOC Emission Test Report for POLTRACK SANDWICH
ISTITUTO GIORDANO
Running Tracks
The POLTRACK SANDWICH running track system has been tested according to ISO 16000, an international standard used to evaluate the emission of volatile organic compounds (VOC) from construction materials.
The PU PRIMER 870 has been tested according to EN 71-3, a European safety standard that evaluates the migration of hazardous elements such as heavy metals from materials.
EN 71-3 + PAH Test Report for PU BINDER 1125 AL (2K)
intertek
Products
The PU BINDER 1125 AL has been tested according to EN 71-3, a European safety standard that evaluates the migration of hazardous elements such as heavy metals from materials.
The PU BINDER 1118 has been tested according to EN 71-3, a European safety standard that evaluates whether hazardous substances such as heavy metals can migrate from materials.
Migration of Certain Elements Test – DIN EN 71-3:2021 | EPDM Rubber Granules
Eco Friendly
intertek
EPDM Granules
The KDF EPDM rubber granules were tested according to DIN EN 71-3:2021 to evaluate the migration of certain chemical elements, including heavy metals. The tested sample successfully met the applicable limits for the evaluated elements and passed additional testing for Polycyclic Aromatic Hydrocarbons (PAHs) under the EU REACH Regulation. These results provide valuable information about the chemical safety of the tested material for applications involving potential human contact.
The POLTRACK FULL-PU running track system has been tested according to EN 71-3, a European safety standard that evaluates the migration of certain hazardous elements from materials.
EN 71-3 Laboratory Report for WET-POUR POLYFLEX PU-EX
SPORTS LABS
Outdoor Sports Flooring
The WET-POUR POLYFLEX PU-EX system has been tested according to EN 71-3, a European standard that evaluates the migration of certain hazardous elements from materials.
The POLTRACK SANDWICH running track system has been tested according to EN 71-3, the European safety standard evaluating the migration of potentially hazardous elements such as heavy metals from materials.
EN 13501-1:2018 Fire Classification for POLEPOX FLOOR 817
TFi
Industrial Flooring
The POLEPOX FLOOR 817 system has been tested and classified according to EN 13501-1:2018, the European standard used to determine the reaction to fire performance of construction materials and flooring systems.
EN 13501-1:2018 Fire Classification for POLEPOX COAT 814
TFi
Industrial Flooring
The POLEPOX COAT 814 epoxy coating system has been tested and classified according to EN 13501-1:2018, the European standard that evaluates the reaction to fire performance of construction materials and flooring systems.
EN 13501-1:2018 Fire Classification for POLYFLEX PU-IN PU-EX
TFi
Indoor / Outdoor Sports Flooring
The POLYFLEX PU-IN PU-EX sports flooring system has been tested and classified according to EN 13501-1:2019, the European standard that evaluates the reaction to fire performance of construction materials used in buildings and sports facilities.
Reaction to Fire Classification – EN 13501-1:2018 | EPDM 856 Granules
TFi
EPDM Granules
The EPDM 856 rubber granules has been tested and classified according to EN 13501-1:2018, the European standard that evaluates the reaction to fire performance of construction materials.
EN 13501-1:2018 Fire Classification for POLTRACK SANDWICH
TFi
Running Tracks
The POLTRACK SANDWICH running track system has been tested and classified according to EN 13501-1:2018, the European standard that evaluates the reaction to fire performance of construction materials and flooring systems.
The AQUASOFT-EX system has been laboratory tested in accordance with BS EN 1177:2018, the European safety standard that determines the impact attenuation performance and Critical Fall Height (CFH) of playground surfacing materials.
The SANDPROOF (colored wet-pour) system (SBR + PU) has been laboratory tested according to EN 1177:2008, the European safety standard used to determine the Critical Fall Height (CFH) of impact-absorbing playground surfacing.
The SANDPROOF (colored wet-pour) system (SBR + PU) has been laboratory tested according to EN 1177:2008, the European safety standard used to determine the Critical Fall Height (CFH) of impact-absorbing playground surfacing.
EN 1176:2017, EN 1177:2018, EN 71-3:2019 Test Report for SAFEPOL MULTICOLOR
TÜV NORD
Playground Flooring
The SAFEPOL MULTICOLOR playground surfacing systems have been certified by TÜV HELLAS according to EN 1176, EN 1177 and EN 71-3, confirming that the systems meet all required safety, impact protection and chemical safety standards for playground applications.
The SAFEPOL MULTICOLOR system has been tested according to EN 1177:2008, the European safety standard that determines the Critical Fall Height (CFH) of impact-attenuating playground surfacing.
ASTM F2772-11 Test Report for WET-POUR POLYFLEX PU-IN, PU-EX 7+2 / 9+2 / 10+2
LABOSPORT
Indoor / Outdoor Sports Flooring
The WET-POUR POLYFLEX PU-IN PU-EX 7+2, 9+2 and 10+2 systems have been tested according to ASTM F2772-11, evaluating the athletic performance and safety of sports flooring, including shock absorption, stability, traction and ball rebound.
The POLYFLEX PU-IN system has been laboratory tested according to the performance requirements defined in the FIBA Official Basketball Rules (2014 edition) concerning basketball equipment.
The POLYFLEX PU-IN system has been officially approved by the Badminton World Federation (BWF) under Grade 1 – International Elite classification. This grade is intended for the highest level of international badminton competitions.
EN ISO 5470-1:2016 Test Report for POLYSPORT 1068 ANTISCRATCH
LABOSPORT
Products
The POLYSPORT 1068 ANTISCRATCH top coating has been laboratory tested according to EN ISO 5470-1:2016, the international standard defining the method for determining abrasion resistance using the Taber Abraser test.
EN 14904:2006 Laboratory Report for POLYFLEX PU-IN 7+2 / 9+2 / 10+2
SPORTS LABS
Indoor Sports Flooring
The POLYFLEX PU-IN systems have been laboratory evaluated according to EN 14904:2006, the European Standard defining performance requirements for indoor multi-sport flooring systems.
The POLYFLEX PU-IN system has undergone preliminary laboratory testing in accordance with EN 14904:2006, the European Standard defining performance requirements for indoor multi-sport flooring systems.
EN 14877:2013 Laboratory Report for POLTRACK JOGGING TRACK
LABOSPORT
Jogging Tracks
The POLTRACK JOGGING TRACK system has been laboratory tested in accordance with EN 14877:2013, the European Standard specifying performance requirements for synthetic surfaces for athletics facilities.
EN 14877:2013 Laboratory Report for POLYFLEX AEL-EX
SPORTS LABS
Outdoor Sports Flooring
The POLYFLEX AEL-EX system has been laboratory tested in accordance with EN 14877:2013, the European Standard specifying performance requirements for synthetic surfaces for athletics facilities.
The COLORFLEX system has been laboratory tested in accordance with EN 14877:2013, the European Standard specifying performance requirements for synthetic surfaces for athletics facilities.
EN 14877:2013 Laboratory Report for POLTRACK SANDWICH IN ROLLS
SPORTS LABS
Running Tracks
The POLTRACK SANDWICH IN ROLLS system has been laboratory tested in accordance with EN 14877:2013, the European Standard specifying performance requirements for synthetic surfaces for athletics facilities.
EN 14877:2013 Laboratory Report for POLTRACK SANDWICH
ACOUSTOSCAN
Running Tracks
The POLTRACK SANDWICH system has been laboratory tested in accordance with EN 14877:2013, the European Standard specifying performance requirements for synthetic surfaces for athletics facilities.
EN 14877:2013 Laboratory Report for POLTRACK SPRAYCOAT
ACOUSTOSCAN
Running Tracks
The POLTRACK SPRAYCOAT system has been laboratory tested in accordance with EN 14877:2013, the European Standard specifying performance requirements for synthetic surfaces intended for athletics facilities.
ASTM F2157-09 Compliance Report for POLTRACK SANDWICH
SPORTS LABS
Running Tracks
The POLTRACK SANDWICH system has been tested in accordance with ASTM F2157-09 (2018), which specifies performance requirements for synthetic surfacing used in sports facilities.
The POLTRACK FULL PU EPDM system has been officially certified by WORLD ATHLETICS as compliant with the technical requirements for international athletics competitions.
The POLTRACK FULL PU system has been officially certified by WORLD ATHLETICS as compliant with the technical requirements for international athletics competitions.
The POLTRACK SANDWICH IN ROLLS system has been officially certified by WORLD ATHLETICS as compliant with the technical requirements for international athletics competitions.
The POLTRACK SANDWICH system has been officially certified by WORLD ATHLETICS as compliant with the technical requirements for international athletics competitions.
The POLTRACK SPRAYCOAT system has been officially certified by WORLD ATHLETICS as compliant with the technical requirements for international athletics competitions.
The SPORTIQUE-EX 3.5mm tennis court system has been officially tested and classified by the International Tennis Federation (ITF) as Category 2 – Medium-Slow court pace.
The SPORTIQUE-EX 5mm tennis court system has been officially tested and classified by the International Tennis Federation (ITF) as Category 2 – Medium-Slow court pace.
The FLEXFLOOR-EX system has been officially recognized by the ITF as a 1-Star Court, confirming that the surface meets the required standards for tennis performance, including ball bounce, pace and player interaction.
The FLEXFLOOR-EX tennis court system has been officially tested and classified by the International Tennis Federation (ITF) as Category 3 – Medium court pace.
The SPORTFLOOR-EX-HARD COURT system has been officially tested and classified by the International Tennis Federation (ITF) as Category 4 – Medium-Fast court pace.
The company operates a certified Business Continuity Management System in accordance with ISO 22301:2019, ensuring structured preparedness and response to operational disruptions.
The company has been assessed as implementing and adhering to the guidelines of ISO 26000:2010, demonstrating structured commitment to Social Responsibility principles.
The company operates a certified Occupational Health & Safety Management System in accordance with ISO 45001:2018, ensuring structured control of workplace health and safety risks.
The company operates a certified Road Traffic Safety Management System in accordance with ISO 39001:2012, ensuring structured procedures to reduce road traffic risks during transportation activities.
The company operates a certified Anti-Bribery Management System in accordance with ISO 37001:2017, ensuring structured procedures to prevent, detect, and address bribery risks.
The company operates a certified Information Security Management System in accordance with ISO / IEC 27001:2023, ensuring structured protection of sensitive data and information assets.
The company operates a certified Environmental Management System in accordance with ISO 14001:2015, ensuring structured control and continuous improvement of environmental performance.
The company operates a certified Energy Management System in accordance with ISO 50001:2018, ensuring structured monitoring, control, and continuous improvement of energy performance.
The company operates under a certified Quality Management System in accordance with ISO 9001:2015, ensuring controlled, documented, and audited production and sales processes.
The KDF products are certified by the Dubai Central Laboratory (DCL) as Low Emitting Materials under the 2023 Al Sa’fat Dubai Green Building System, confirming compliance with strict VOC and environmental standards for sustainable projects in the UAE.