POLAPLAST P100.15 kg/m2 - 0.2 kg/m2
Mixture of POLAPLAST P13, RECYCLED RUBBER 0.5-2.5mm and ELASTOTURF NEUTRO 850POLAPLAST P13 1.2 kg/m2 + RECYCLED RUBBER 6.0 kg/m2 + ELASTOTURF NEUTRO 850 1.3-2.5 kg/m2
Mixture of ELATOTOTURF TRACK and EPDM 0.5 -1.5mmELASTOTURF TRACK 1-1.5 kg/m2 + EPDM 1-1.5 kg/m2
Ιnnovative, new, synthetic outdoor economical system in total thickness of 13mm with the shockpad or as outdoor system for refreshing old courts in 2-3mm thickness.
It is applied on fine asphalt or smooth, or waterproof concrete without rising humidity issues, with first wet-pour base layer mixture (mixed at site) of 11mm, which consists of RECYCLED RUBBER in granulometry of 0.5-2.5mm and the polyurethane binder POLAPLAST P13, and the second layer (sealing layer) the acrylic pore filler ELASTOTURF NEUTRO 850 on top of the cushion mixture (optional) or even directly on old, clean acrylic surfaces. The final layer (surface layer) is the mixture of highly pigmented 100% acrylic ELASTOTURF TRACK with colored EPDM rubber in fine granulometry. It is designed for use on new asphalt or over existing colored surfaces. Ideal solution for making old track surfaces look good as new or make a new track altogether. Priming with POLAPLAST P10 precedes the application.
Application method : First layer is applied by special paving machine (or flat metal trowel) and second layer is applied by special spraying machine or squeegees.
1. POLAPLAST P10 - Polyurethane primer.
2. Mixture of POLAPLAST P13, RECYCLED RUBBER and ELASTOTURF NEUTRO 850(optional).
3. Mixture of ELASTOTURF TRACK and EPDM rubber. It is applied by paving machine or squeegee in two or three layers.